Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Modelo: SPS300VAC6000W
Paquete: cartón
transporte: Air
Hafen: DHL
Tipo de Pago: T/T
Incoterm: EXW
La fuente de alimentación APM 3 fase de CA son las fuentes de energía más rentables para el desarrollo, la prueba y las aplicaciones de producción que requieren menos de 6000VA de salida de CA o CC. Diseño de tecnología PWM para lograr un rendimiento y eficiencia óptimos. Este sistema de alimentación de CA Función de atenuación incorporada, Función de barrido de punto de potencia máxima, medidor de alimentación, etc. Soporte para la lista/pulso/modo Paso, IEC61000-4-11 etc.
Hay más modelos, una fuente de CA de fase 3 de 1800W y una fuente de CA de 3000 W de fase 3, una fuente de CA 3 de fase 3500W, un sistema de fuente de CA trifásico de 9000W, sistema de fuente de CA trifásico de 15000W para su referencia.
Área de aplicación :
Esta serie es aplicable a múltiples sectores, como sectores eléctrico, iluminación y de aviación, y también podría aplicarse a la prueba de producción de Enterprise.
Características del producto:
● 5.6`` Gran pantalla táctil, posee funciones completas y fáciles de operar.
● Soporte para la importación/exportación de datos USB y la pantalla de pantalla desde el panel frontal.
● Modo de salida mixto o independiente AC+DC para simulación de compensación de CC de voltaje.
● Capaz de configurar el voltaje y la restricción de salida de corriente, soporte para el modo de salida de corriente constante.
● Capaz de configurar la pendiente de salida de voltaje y frecuencia.
● Capaz de configurar/apagar el ángulo de fase.
● Con protección de corriente inversa para evitar que la corriente fluya hacia atrás.
● Medidor de potencia incorporado, que es capaz de medir 5 parámetros eléctricos por fase, que incluye voltaje, corriente, energía, etc.
● Soporte de la función de medición de corriente MA.
Funciones básicas:
1. Ángulo/pendiente de fase ajustable
El ángulo/pendiente de fase ajustable es aplicable a la prueba de verificación de las pruebas de corriente de encendido/apagado. Esta función es aplicable para iniciar una carga inductiva o capacitiva con una gran capacidad para evitar una corriente alta cuando se inicia instantáneamente el dispositivo.
2. Factor de cresta de corriente de alta salida de salida
La corriente de sobretensión podría alcanzar las 5-6 veces de la corriente nominal, especialmente adecuada para las pruebas de corriente de entrada.
3. Secuencia de simulación de salida y simulación de perturbaciones
Capaz de simular la prueba de simulación de perturbación de la línea de alimentación.
Funciones avanzadas :
1. Prueba estándar de IEC construida
La prueba estándar IEC incorporada se puede recuperar directamente.
Operación de 2.3 fases y modo paralelo
Soporte de operación 3 fases, 3 unidades en paraleloEspecificación técnica:
MODEL | SPS300VAC6000W | ||
INPUT | |||
1 | Voltage | 190~265VAC | |
2 | Frequency | 47~63Hz | |
3 | Phase | 3 Phase,4Wire+Groud/Y Connect | |
4 | Max.Current | 42A | |
5 |
Power Factor @220Vac Input ,Full Load |
0.99 Min. Active PFC | |
6 | Effieciency |
>87% Max >86% @220Vac,50HZ input/230Vac,50HZ output |
|
3-Phase Output Mode | |||
7 | AC Power(Per Phase) | 2000VA | |
8 | AC Power(Total) | 6000VA | |
9 |
Max.Current (r.m.s) |
0~150V(L) | 16A |
0~300V(H) | 8A | ||
10 |
Max.Current (Peak) |
0~150V(L) | 80A |
0~300V(H) | 40A | ||
Parallel Phase Mode | |||
11 |
Max.Current (r.m.s) |
0~150V(L) | 48A |
0~300V(H) | 24A | ||
12 |
Max.Current (Peak) |
0~150V(L) | 240A |
0~300V(H) | 120A | ||
13 | Phase | 1 Phase | |
OUTNPUT | |||
14 | Total Harmonic Distortion(THD) |
<0.5% (Resistive Load) at 15.0 -
70.0Hz and output voltage within the 80 - 140Vac at Low Range or the 160 -
280Vac at High Range <1% (Resistive Load) at 70.1 - 500Hz and output voltage within the 80 - 140Vac at Low Range or the 160 - 280Vac at High Range <1% (Resistive Load) at 501 - 1000Hz and output voltage within the 100 - 140Vac at Low Range or the 160 - 280Vac at High Range |
|
15 | Crest Factor(CF) | ≤5 | |
16 | Load Regulation |
+/-0.2%FS @15-100HZ(Resistive
Load) +/-0.5%FS @ Others Freq.(Resistive Load) |
|
17 | Line Regulation | ±0.1V | |
18 |
Voltage(AC) (L-N) |
Range | 0~300VAC, 150V/300V/Auto Mode |
Resclution | 0.1V | ||
Accuracy | 0.2% of setting +0.4%F.S at Voltage>3V | ||
19 |
Phase
Angle (Starting/Ending) |
Range | 0~359.9° |
Resclution | 0.1° | ||
Accuracy | ±1° @45~65Hz | ||
20 | Voltage(DC) | Range | 0~424VDC |
Resclution | 0.1V | ||
Accuracy | 0.2% of setting +0.4%F.S at Voltage>3V | ||
DC Power |
2000W | ||
Max.Current (L/H Range) (Per Phase) |
L 11.3A | ||
H 5.65A | |||
DC Power(Total) | 6000W | ||
Max.Current (L/H Range) (Total) |
L 33.9A | ||
H 16.95A | |||
Ripple&Noise(r.m.s) |
L <700mVrms
@Bandwidth 20HZ to 1MHZ |
||
Ripple&Noise(Peak) | <4000mVp-p @Bandwidth 20HZ to 1MHZ | ||
21 | Current OC Fold Mode | Resclution | 0.1A |
Accuracy | 2.0% of setting +1.0%F.S. | ||
Response Time | <1400ms | ||
22 | Frequency | Range | 15~1000Hz |
Resclution | 0.1Hz(15.0~99.9Hz) ,1Hz(100~1000Hz) | ||
Accuracy | 0.03% of setting | ||
23 | Progrmmable Output Impedance | Not Support | |
24 | Harmonic & Inter-harmonics Simulation | Not Support | |
MEASUREMENT(Per Phase) | |||
25 |
Voltage (Per Phase) |
Range | AC 0~300VAC |
DC 0~424VDC | |||
Resclution | 0.1V | ||
Accuracy | 0.2% of setting +0.4%F.S. (Notes: Vpeak: 0.6% of setting +1%F.S.) | ||
26 |
Frequency (Per Phase) |
Range | 15~1000Hz |
Resclution | 0.1Hz(15.0~99.9Hz) ,1Hz(100~1000Hz) | ||
Accuracy | 0.1% of setting | ||
27 |
Current* (r.m.s) (Per Phase) |
Range | H 0.15A~20A |
M - | |||
L 0.1A~5A | |||
mA 0.02A~1.5A | |||
Resclution | 0.01A | ||
Accuracy | 0.4%+1.0%F.S. | ||
28 |
Current* (PEAK) (Per Phase) |
Range | 0A~81.5A |
Resclution | 0.01A | ||
Accuracy | 0.4%+1.5%F.S. | ||
29 |
Power (Per Phase) |
Range | 0~2040W |
Resclution | 0.1W | ||
Accuracy | 0.4% of setting +0.3%F.S at PF>0.2, Voltage >5V | ||
30 |
Power
Apparent |
Range | 0~2040VA |
Resclution | 0.1VA | ||
Accuracy | Voltage*Irms,Calculated value | ||
31 |
Power Resistive (VAR) (Per Phase) |
Range | 0~2040VAR |
Resclution | 0.1VAR | ||
Accuracy | √[(VA)^2-(W)^2],Calculated value | ||
32 |
Power Factor (PF) |
Range | 0.00~1.00 |
Resclution | 0.01 | ||
Accuracy | W/VA, Calculated value | ||
33 | Harmonic | Range | Not Support |
Extra Function | |||
34 | Slew Rate | Range | AC Voltage 0.001-1200.00V/mS and Disable |
DC Voltage 0.001-1000.00V/mS and Disable | |||
Frequency 0.001-1600.000HZ/ms and Disable | |||
35 | Remote Sense | Range | 5V(RMS), Max. Total power less than rated power |
36 | Cablibration |
Firmware-based cablibration through
the digital interface or front panel display Noted: Need Factory setting |
|
37 |
Test Mode | Not Support | |
38 | Graphic Display | 5.6'' Color touch LCD | |
39 | Operation Key Feature | Soft key,Numberic key,Rotary Knob,Support USB disk | |
40 | Rack mount Handles | YES | |
41 | FAN | Temperature Control | |
42 | Protection Circuits | OCP, OVP, OPP, OTP, RCP, PRI_UVP, PRI_OVP, PRI_OTP, PRI_OCP, USB_OCP | |
43 | Interface | Standard USB,RS485,RS232, Option GPIB interface | |
Environmental | |||
44 | Operating Temperature | 0°C to 40°C | |
45 | Storage Temperature | -40°C to 85°C | |
46 | Altitude | 2000m | |
47 | Relative Humidity | 5-95%, non-condensing | |
48 | Temperature Coefficient | 100ppm/°C at Voltage, 300ppm/°C at Current, 100ppm/°C at FREQ | |
Mechanical | |||
49 | Dimensions(W*H*D) | 560x945x700 mm | |
50 | Unit Net Weight | 134.0kg |
PRODUCTOS POR GRUPO : Sistema de fuente de CA trifásico > Sistema de fuente de CA trifásico de 6000W
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.