Contactar Proveedor

Ms. Emily Cui
Deja un mensajeInformación básica
Modelo: SYS600VDC12000W
DDescripción
APM tiene una fuente de alimentación de alto voltaje para satisfacer su solicitud de fuente de alimentación CC programable de 1000v . Este sistema de rack de 6U de la serie SYS puede conectar fácilmente en paralelo hasta 3 unidades capaces de 12KW con una corriente máxima de 30A. La mejor fuente de alimentación variable para cumplir con los requisitos de prueba de diferentes campos, incluidos automóviles, hogares, comunicaciones, educación, sector de investigación científica, etc.
Excepto el sistema de fuente de CC de 600 V, también podría tener una opción de voltaje más alto para el sistema de fuente de CC de 800 V o un sistema de fuente de CC de 200 V más bajo, por favor verifique más con las ventas regionales.
Área de aplicación :
Esta serie es aplicable a múltiples sectores, como los sectores eléctrico, de iluminación y de aviación, y también podría aplicarse a la prueba de producción empresarial.
Características del producto:
● Con capacidad de medición precisa de voltaje y corriente.
● Perilla codificada, teclado multifunción.
● Interfaces de comunicación estándar RS232 / RS485 / USB / LAN, GPIB es opcional.
● Compensación de caída de voltaje de línea de detección remota.
● Equipado con la función de edición de forma de onda LIST.
● Utilice el protocolo de comunicación de comandos estándar para instrumentación programable (SCPI).
● Haber obtenido la certificación CE.
Especificación técnica:
ltem | MODEL | SYS600VDC12000W | |
INPUT | |||
1 | Voltage | 190~265VAC | |
2 | Frequency | 47~63Hz | |
3 | Phase | 3 Phase,4Wire+Groud/Y Connect | |
4 | Max.Current | 75A | |
5 | Input Power Max | 15kW | |
6 |
Power Factor at 220VAC Input ,Full Load |
0.98 Min. Active PFC | |
7 | Efficiency | >88% Max @Full Load and Units=4kW Model | |
OUTNPUT (Parallel Mode) | |||
8 | Output Voltage | 0~600V | |
9 | Output Current | 0~30A | |
10 | Output Power | 12kW Max | |
11 | Load Regulation | Voltage | 240mV |
12 | Current | 30mA | |
13 | Line Regulation | Voltage | 0.02%F.S.+30mV |
14 | Current | 0.02%F.S.+15mA | |
15 | Voltage Setting | Range | 0~600V |
16 | Resolution | 1mV | |
17 | Accuracy |
0.1%+0.1%F.S. at 0< Ouput
Voltage =<75Vdc 0.05%+0.05%F.S. at 75Vdc< Ouput Voltage =<1200Vdc |
|
18 | Current Setting | Range | 0~30A |
19 | Resolution | 1mA | |
20 | Accuracy | 0.1%+0.10%F.S | |
21 | Ripple | Voltage | 700mVp-p/80mVrms |
22 | Current | 37.5mA(Full Range),15mA(TYP Value) | |
MEASUREMENT (Parallel Mode) | |||
23 | Voltage Setting | Range | 0~600V |
24 | Resolution | 1mV | |
25 | Accuracy |
0.1%+0.1%F.S. at 0< Ouput
Voltage =<75Vdc |
|
26 | Current Setting | Range | 0~30A |
27 | Resolution | 1mA | |
28 | Accuracy | 0.1%+0.10%F.S | |
Extra Function | |||
29 | Remote Sense | Range | 5V(DC), Max. Total power less than rated power |
30 | Comm. Respondence. | 50ms | |
31 | Graphic Display | VFD | |
32 | Operation Key Feature | Soft key,Numberic key,Rotary Knob | |
33 | Rack mount Handles | Yes | |
34 | FAN | Temperature Control | |
35 | Protection Circuits | OCP, OVP, OPP, OTP,FAN | |
36 | Interface | USB, RS485, RS232, LAN(Standard); GPIB(Option) | |
Remote Control Input/Output signal characteristics | |||
37 | Remote Input signal | Not Support | |
38 | Remote output signal | Not Support | |
Environmental | |||
39 | Operating Temperature | 0°C~40°C | |
40 | Storage Temperature | -20°C~70°C | |
41 | Altitude | 2000m | |
42 | Relative Humidity | 10%~90%, non-condensing | |
43 | Temperature Coefficient | 100ppm/°C at Voltage, 300ppm/°C at Current | |
Mechanical | |||
44 | Dimensions(W*H*D) | 600.0*736.0*700.0 mm | |
45 | Package Dimensions(W*H*D) | 720.0*910.0*820.0 mm | |
46 | Unit Net Weight | 54kg+15kg*N(REF) | |
47 | Accessories Weight | 0.4kg | |
48 | Shipping Weight | 94kg+15kg*N(REF) | |
Regulatory Compliance | |||
49 | CE Mark | Installation Overvltage Category II;Class II equipment;indoor use only. |
PRODUCTOS POR GRUPO : Sistema de fuente DC > Sistema de fuente de CC 600V
Productos hot